New Beetle L5-2.5L (BPS) (2006)
Ball Joint: Testing and Inspection
Front Suspension
Ball Joint, Checking
Axial Play, Checking
-
Pull control arm firmly downward and press back up again.
Radial Clearance, Checking
-
Press wheel firmly in and out at bottom.
‹› There should be no noticeable or visible "play" in either of the two checks.
‹› Observe lower ball joint while performing checks.
‹› Make allowance for any wheel bearing play or "play" in strut mounting at top.
‹› Check rubber boot for damage, replace lower ball joint, if necessary.