New Beetle L5-2.5L (BPS) (2006)
-
Using a multimeter, check the Solenoid Valve terminals 1 to 2 at the Solenoid Valve electrical harness connector for resistance.
If any of the specified values are not obtained:
-
Replace the faulty Solenoid Valve.
If the specified values are obtained:
Checking wiring
If the manufacturers test box is being used. Perform the following step.
-
Install the test box. Install the Adapter F/VAG1598 VAG1598/22.
If the manufacturers test box is not being used. Perform the following step.
-
Remove the Transmission Control Module (TCM) J217.