New Beetle L5-2.5L (BPS) (2006)
-
If ATF level is checked, oil seal - arrow - on ATF inspection plug must always be replaced.
ATF Level, Checking
ATF Level, Checking
-
Switch off engine.
The ATF temperature should not be more than approximately 30°C at start of test.
^
Transmission not in emergency running mode; ATF temperature not above approximately 30°C
^
Vehicle must be standing level
^
Selector lever in "P".
-
Connect tester and continue switching until it is ready for operation Vehicle Diagnosis, Testing and Information System VAS 5051, Connecting
and Selecting Functions.
-
Press right Guided Functions.
-
Then select vehicle, the transmission and Check ATF Level.
-
Press ->.
-
Start engine.
-
Raise vehicle.
-
Place drip tray under transmission.
-
Press.
If a test temperature between 35°C and 45°C is displayed: