New Beetle L5-2.5L (BPS) (2006)
‹› Counterparts of connector must have the same identification as the respective connector.
-
Install bracket to Transmission Fluid Temperature Sensor (G93) - 7 -.
-
Insert Transmission Fluid Temperature Sensor ( G93) together with bracket into valve body.
-
Tighten bolt - 6 - to 11 Nm.
-
Connect connectors vertically to hydraulic pressure sensors - 1 - and - 4 -.
-
Tighten bolts - 3 - of bracket for harness connectors - 2 - and - 5 - => [ (Item 14) Bolt, 7 Nm ] See: Valve Body Assembly Overview.