New Beetle L5-2.5L (BPS) (2006)
Clutch Release Bearing: Service and Repair
Clutch Release Mechanism
Clutch Release Mechanism
Special tools, testers and auxiliary items required
‹› Torque wrench 5 to 50 Nm (V.A.G 1331)
‹› MoS2 grease
Remove and Install Clutch Release Lever Along with Release Bearing
-
Disengage spring - arrow 1 -.
-
Remove clutch release lever - arrow 2 - and release bearing.
-
Installation is performed in reverse order of removal.
Release Bearing, Removing and Installing
-
Press together retaining tabs - arrows - on rear side of clutch release lever and remove release bearing - A - from clutch release lever.
-
To install release bearing - A -, press into clutch release lever until retaining tabs - arrows - engage.