New Beetle L5-2.5L (BPS) (2006)
Pressure Plate: Service and Repair
Clutch, LuK
Clutch, LuK
Special tools, testers and auxiliary items required
‹› Flywheel retainer (3067)
‹› Centering mandrel (3190 A)
‹› Torque wrench 5 to 50 Nm (V.A.G 1331)
‹› Grease for clutch disc splines (G 000 100 )
Removing
-
Remove transmission => [ Transmission, Removing ] See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transmission, Removing.
-
Insert flywheel retainer (3067) to loosen bolts.
-
Loosen bolts in a diagonal sequence and in stages.
-
Remove pressure plate and clutch plate.
Installing
Installation is in reverse order of removal. Note the following:
‹› Pressure plate and clutch plate must only be replaced together. Allocate pressure plate and clutch plate via engine code.
Installation Position of Clutch Plate
‹› Marking "Getriebeseite" (transmission side) faces transmission.
Checking Ends of Diaphragm Spring