New Beetle L5-2.5L (BPS) (2006)
‹› Residual material acts as a base for the new adhesive sealing material. Keep adhesive surface free of dirt and grease.
‹› Activator must not come into contact with the paint - otherwise paint will be damaged.
Exception: If bonding is not performed immediately after cutting back, the remaining material must be activated using the Activator ( D 181 801 A1).
‹› If body flange is being worked on or is partially replaced, it must be cleaned and primed again after painting the corresponding area.
Removal and Replacement
Flush-Bonded Windows
Windshield
Removing
-
Remove A-pillar trim.
-
If necessary, remove rain sensor, refer to => [ Rain Sensor ]. See: Windows/Service and Repair/Removal and Replacement/Flush-Bonded
Windows
-
Remove both sun visors.
-
Unhook sun visor - 1 - out of mount - 2 -.