New Beetle L5-2.5L (BPS) (2006)
Wiper Arm: Service and Repair
Windshield Wiper Blades, Checking End Position and Angle
03 - Service Procedures
Windshield Wiper Blades, Checking End Position and Angle
‹› Windshield Wiper Blades, Checking Angle and Adjusting
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
Windshield Wiper Blades, Checking End Position and Adjusting
-
Check end position.
Driver side:
The space - A - between the wiper rubber and bottom edge of windshield must be 20 mm.
-
If necessary, adjust the park position by relocating the wiper arm.
Wiper arm tightening specification: 20 Nm
Passenger side: