New Beetle Convertible L5-2.5L (BPR) (2007)
Adjusting gap dimension - C - and - D -.
Large and small trim may show different height with respect to side trim.
-
Heights - A - and - B - should be same heights as side trim to avoid jamming or damage when opening or closing trim.
Adjusting trim height - A -.
Adjusting trim height - B -.
Adjusting gap dimension A
-
Remove side trim. Refer to => [ Side Trim ] See: Pillar and Side Trims, Convertible.
-
Disconnect pressure rod - 2 -.
-
Open trim - 4 -.
-
Loosen bolts - 1 -.
-
Align trim module - 3 - in the - direction of the arrow -.
-
Tighten bolts to - 1 - to 3 Nm.
-
Close trim - 4 -.
-
Connect pressure rod - 2 -.