New Beetle Convertible L5-2.5L (BPR) (2007)
/Page-2908026.png)
Adjusting trim height - B -.
Adjusting gap dimension C and D
-
Remove side trim. Refer to => [ Side Trim ] See: Pillar and Side Trims, Convertible.
-
Remove bolts - 1 -.
-
Align trim module - 2 - in the - direction of the arrow -.
-
Tighten bolts to - 1 - to 3 Nm.
-
Check gap dimension - C - and - D - for a distance of 3.5 to 4.5 mm and repeat the adjustment if necessary.
