New Beetle Convertible L5-2.5L (BPR) (2007)
Power Door Lock Switch: Service and Repair
Interior Lamps and Switches
‹› When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic
sedge, screwdriver) will be positioned using commercially available adhesive tape.
Driver/Front Passenger Interior Locking Switch
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the key.
‹› When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying
tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.
Removing
-
Remove door trim panel.
-
Disconnect the connector on the switch.
-
Loosen the switch housing - A - by pushing it on the side from the frame - B - and remove it.
Installing
Install in reverse order of removal.