volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Convertible Top Cover, Electric/Hydraulic Convertible Top|Page 14369 > < Body - Trunk Lid Paint Wear on Outer Edge|Page 14366
Page 1
background image

Convertible Top Canvas: Service and Repair
Convertible Top Cover, Electric/Hydraulic Convertible Top

Convertible Top

Convertible Top Cover, Electric/Hydraulic Convertible Top

‹› Protect chrome moldings and side trim against paint damage using suitable protective covers and fabric reinforced adhesive tape.

Removing

-

Remove seatbench and headrest cover.

-

Cover edges of automatic anti-roll supports using tape or fabric. 

-

Slide window completely open.

-

Open convertible top half way.

-

Observe safety precautions. Refer to=> [ Convertible Top Safety Precautions ] See: Service Precautions.

-

Using plastic wedge, remove clips - 11 - from front side of roof edge trim - 13 -, then remove clips -  12 - from rear side of roof front edge trim.

-

Turn handle - 10 - 90o and loosen roof edge trim - 13 -.

-

Pull front roof frame seal off roof frame - arrow -. 

Convertible Top Cover, Electric/Hydraulic Convertible Top|Page 14369 > < Body - Trunk Lid Paint Wear on Outer Edge|Page 14366