volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 14578 > < Procedures|Page 14576
Page 4
background image

-

Pull out trim - 1 - in an upward direction.

Installation

To install, perform the steps used in removal in reverse order.

Removing small trim

-

Remove the main frame of the lid module. Refer to => [ Small Trim Lid Module Assembly Overview ] See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Removal and Replacement/Pillar and Side Trims, Convertible Overview Item 12.

-

Carefully pry off trim - 1 - from bracket -  2 - using screwdriver - 3 -.

Installation

To install, perform the steps used in removal in reverse order.

Side Trim, Convertible With Power Top, Large Roof Lid and Servomotor Assembly Overview

Pillar and Side Trims, Convertible

Side Trim, Convertible with Power Top, Large Roof Lid and Servomotor Assembly Overview

Side trim is offered as two-part replacement part. Door panel (upper part) - 1 - must be painted the vehicle color and then secured to lower part - 6 -.

‹› For convertibles with manually operated convertible top and power convertible top without large roof lid and lid servomotor, refer to => [ Side

Trim Assembly Overview, Convertible without Large Roof Lid and Servomotor ]. See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Removal and Replacement/Pillar and Side Trims, Convertible Overview/Side Trim Assembly Overview, Convertible Without Large Roof
Lid and Servomotor

Procedures|Page 14578 > < Procedures|Page 14576