New Beetle Convertible L5-2.5L (BPR) (2007)
Brake Caliper
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Brake pedal actuator (V.A.G 1869/2)
Removing
The work sequence applies only for replacement of the brake caliper housing or the following repairs on the brake caliper housing.
-
Remove wheels.
-
Disconnect harness connector - 1 - on vehicles with brake pad wear indicator.
-
Attach bleeder bottle bleeder hose onto bleeder valve of brake caliper housing and open bleeder valve.
-
Install brake pedal actuator (V.A.G 1869/2 ).
-
Close bleeder valve and remove bleeder bottle.
-
Remove brake hose.
-
Pull both covers out of brake caliper housing bearing bushings.
-
Unscrew and remove both guide pins - arrows - from brake caliper housing.
-
Remove brake caliper housing from brake carrier.