Brake Caliper Replacement for 2007 New Beetle Convertible L5-25L: Service Guide
Brake Caliper: Overhaul
Brake Caliper Housing Piston
Brake Caliper Housing Piston
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
‹› Piston resetting tool (T10145)
Removing
-
Force piston from brake caliper housing using compressed air.
‹› Place a wooden board into the recess of the caliper housing to catch the piston so it is not damaged.
-
Remove seal using trim removal wedge (3409).
‹› When removing, make sure that surface of cylinder is not damaged.
Installing
-
Use only appropriate solvent to clean surfaces of piston and protective seal, then dry.
-
Apply thin coat of assembly paste (G 052 150 A2 ) to piston and protective seal before installing.