New Beetle Convertible L5-2.5L (BPR) (2007)
-
Install brake caliper housing with brake pads to wheel bearing housing.
Brake caliper housing pin - arrow - must be behind wheel bearing housing guide!
-
Tighten brake caliper housing to brake carrier using both guide pins.
-
Insert connector for brake pad wear indicator into bracket at suspension strut.
-
Mount wheels.
‹› After replacing brake pads and before moving vehicle, always depress brake pedal several times firmly to properly seat brake pads in their normal
operating position.
‹› Check brake fluid level after replacing brake pad.
Front Brakes, FN 3
Brake Pads
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Piston resetting tool (T10145)