New Beetle Convertible L5-2.5L (BPR) (2007)
/Page-1919002.png)
Test Steps, Overview
Test Table, Test Steps 1 through 4
‹› Socket designations of adapter cable, 121 pin (V.A.G 1598/31) are identical to terminal designations of the Engine Control Module (ECM) in
wiring diagram.
‹› If the measured values do not match the specifications, carry out the corrective actions on the right side of the table.
‹› If measured values differ slightly from specified values, clean sockets and connectors of the testers and test leads (using contact spray (G 000 700
04)) and repeat test. Before replacing the relevant components, check wires and connections and repeat resistance measurement at component,
especially for specified values under 10 ohms.
