New Beetle Convertible L5-2.5L (BPR) (2007)
(T03004) must stand out approximately 3 millimeter (mm) on the inner side - B -. The surface - A - is the outer side. The surface - B - is the
inner side (sealing surface).
-
Cut the tube nozzle at the front mark (jet nozzle approximately 2 mm).
‹› The sealing flange for the crankshaft must be installed within 5 minutes after application of sealant.
-
Apply a sealant bead - A - as shown into the groove of the sealing flange.
‹› Width of sealant bead: 2.5 to 3.0 mm