New Beetle Convertible L5-2.5L (BPR) (2007)
-
Loosen the bolts again slightly.
-
Secure the (2036/1) from the (2036) onto the cylinder block as shown.
-
Press the upper oil pan firmly onto the (2036/1) and tighten the bolts again hand tight.
-
Install the remaining bolts and tighten by hand.
Make sure that upper oil pan makes contact on the (2036/1 ).
-
Tighten all bolts in a diagonal sequence from the inside working toward the outside.
-
Install new seal - 5 - into the oil pump - 6 -.
-
Secure the oil intake pipe - 1 - and the bracket - 4 - with the bolts - 2 and 3 -.
-
Install the guide rail - 2 -, relieve the tension on the chain tensioner - 1 - and pull out the (T10115).