New Beetle Convertible L5-2.5L (BPR) (2007)
Headlamp Alignment Control Module: Service and Repair
HID Headlamp
Headlamp Range Control Module
The Headlamp Range Control Module (J431) is installed in the left front wheel housing.
Removing
-
Remove the left front wheel housing liner.
-
Remove the screws - 1 - on the Headlamp Range Control Module (J431).
-
Disconnect the connector - 2 - on the Headlamp Range Control Module (J431).
Installing
Install in reverse order of removal, noting the following:
-
Make sure the headlamp is working correctly.
Coding the Headlamp Range Control Module (J431).
-
Perform basic setting of headlamp, refer to => [ HID Headlamp, Basic Setting ] See: Service and Repair/Procedures/HID Headlamp, Basic Setting
.