volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 16030 > < Diagram Information and Instructions|Page 16024
Page 1
background image

Marker Lamp Bulb: Procedures

Front Turn Signal and Side Marker Light Bulb, Replacing

Front Turn Signal and Side Marker Light Bulb, Replacing

Removing

-

Remove turn signal lights and side marker lights.

-

Turn bulb holder in direction shown -arrow- and pull out from housing.

-

Remove bulb from holder.

Installing

CAUTION:  Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during
operation, can cause the glass to cloud over.

-

Install in reverse order of removal.

-

When installing, make sure bulb holder engages in housing by turning in opposite direction to direction shown -arrow-.

Front Side Marker Light Bulb (Turbo S), Replacing

Front Side Marker Light Bulb (Turbo S models only), Replacing

Removing

CAUTION:

-

Switch off all electrical consumers.

-

Switch ignition off and remove ignition key.

-

Remove front inner fender liner.

-

Turn bulb holder in direction of -arrow- and pull out from housing.

-

Pull out bulb, do not turn.

Installing

CAUTION:  Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during

Procedures|Page 16030 > < Diagram Information and Instructions|Page 16024