New Beetle Convertible L5-2.5L (BPR) (2007)
Fluid - A/T: Testing and Inspection
ATF Level, Checking
ATF Level, Checking
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Used oil collection and extraction unit (V.A.G 1782 )
‹› Vehicle diagnosis, testing and information system ( VAS 5051)
‹› Drip tray for workshop hoist (VAS 6208)
‹› Adapter for filling oil (VAS 6262)
‹› Adapter (VAS 6262/2)
-
Switch off engine.
The ATF temperature should not be more than approx. 30° C at start of test.
‹› Transmission not in emergency running mode; ATF temperature not above approx. 30 °C
‹› Vehicle must be standing level
‹› Selector lever in "P".
-
Connect "tester" and continue switching until it is ready for operation => [ VAS 5051, Connecting and Selecting Functions ] See: Transmission
and Drivetrain/Automatic Transmission/Transaxle/Testing and Inspection/Scan Tool Testing and Procedures.
-
Press "right" Guided Functions.
-
Then select vehicle, the transmission and Check ATF Level.
-
Press ->.