New Beetle Convertible L5-2.5L (BPR) (2007)
Fuel Gauge Sender: Service and Repair
Removal and Installation
Engine Code BPR (Metal Fuel Tank)
Fuel Level Sensor
Removing
-
Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] See: Service and Repair/Removal and Replacement/Removal and
Installation/Fuel Delivery Unit.
-
Disengage the connector prongs for wires - 1 and 2 - and disconnect.
-
Pry up the retaining tabs - 3 and 4 - using screwdriver and pull the fuel level sensor downward in the - direction of the arrow -.
Installing
-
Install the fuel level sensor into the guides on the fuel delivery unit and press up until engagement.
-
Insert the connector prongs for the wires - 1 - (blue) and - 2 - (black).
-
Install the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] See: Service and Repair/Removal and Replacement/Removal and Installation/Fuel
Delivery Unit.