New Beetle Convertible L5-2.5L (BPR) (2007)
Ignition Lock Cable: Service and Repair
Ignition Key Removal Lock Cable, Disengaging and Engaging
Applies Only to Vehicles with Automatic Transmissions
Adjust locking cable.
Disengaging
-
Remove steering wheel.
-
Remove steering column switch trim.
-
Place selector lever in position "P" if necessary.
-
Turn ignition key - A - into position "ignition on".
-
Press clip - 1 - upward or downward according to installation position and simultaneously pull out locking cable - 2 -.
Engaging
-
Place selector lever in position "P".
-
Turn ignition key - A - into position "ignition on".
-
Slide locking cable - 2 - in steering lock housing until clip - 1 - engages.