New Beetle Convertible L5-2.5L (BPR) (2007)
/Page-2149003.png)
The 0-line on roof symbolizes the horizontal position (zero position) of the vehicle.
-
If necessary, correct the existing difference.
At the front axle, it can be compensated by applying weights on to corresponding suspension strut dome in engine compartment.
At the rear axle, it can be compensated by applying weights in luggage compartment on the corresponding vehicle side.
For example, sand bags of approximately 10 kg are suitable as weights.
Front Axle Camber, Adjusting
Front Axle Camber, Adjusting
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
If values are outside tolerance, transverse inclination must be checked first and compensated if necessary => [ Vehicle Transverse Inclination Neutral
Position ] See: Wheel Alignment, Preparing to Measure.
Only by moving the subframe is it possible to center the camber within specified range.
-
Loosen bolts - 1 - and - 2 -.
