New Beetle Convertible L5-2.5L (BPR) (2007)
-
Then tighten two bolts - arrows B -.
-
Install exhaust system and tunnel bridge.
-
Install selector mechanism cover and circuit board => [ Selector Mechanism Cover and Circuit Board ] See: Shifter A/T/Service and
Repair/Removal and Replacement/Selector Mechanism Cover and Circuit Board.
-
Install center console
-
Install selector lever handle => [ Selector Lever Handle ] See: Shifter A/T/Service and Repair/Removal and Replacement/Selector Lever Handle.
-
Connect battery Ground (GND) cable.
-
Check selector mechanism => [ Selector Mechanism, Checking ] See: Shifter A/T/Testing and Inspection.
-
Initialize electric window regulators, set clock.