New Beetle Convertible L5-2.5L (BPR) (2007)
-
Remove oil pan bolts - arrows - using diagonal and alternating sequence.
‹› A small amount of ATF remains in the oil pan as not all the oil can drain through opening - A -.
-
Remove oil pan together with gasket.
Installing
Installation is in reverse order of removal. Note the following:
-
Clean two magnets located in webs of oil pan. Ensure magnets have full contact with oil pan.
-
Insert oil pan with a new gasket.
-
Make sure oil pan gasket is seated correctly.
-
Lines must not be jammed when installing oil pan.
-
Tighten oil pan bolts - arrows - in diagonal sequence and in stages => [ (Item 5) Bolt, 7 Nm ] See: Valve Body/Service and Repair/Valve Body
Assembly Overview.