New Beetle Convertible L5-2.5L (BPR) (2007)
Shift Interlock Cable: Service and Repair
Locking Cable
Removing
-
First determine whether a coded radio is installed. In this case, determine anti-theft coding.
-
Place selector lever in position "P".
-
Switch ignition off and disconnect battery Ground (GND) cable.
-
Remove driver's side airbag unit and steering wheel.
-
Remove left trim below instrument panel.
-
Remove steering column trim.
-
Remove bolts - 1 - from handle for steering column height and longitudinal adjustment - 2 -.
-
Switch ignition key to driving position (ignition on).
-
Pull out clip - 2 - of locking cable - 3 -.