New Beetle Convertible L5-2.5L (BPR) (2007)
-
Remove tunnel bridge - B - beneath exhaust system.
-
Remove heat shields - C - and - D -.
-
Remove selector mechanism from body - arrows B -. Do not loosen nuts - arrows A -.
-
Remove selector mechanism with selector lever cable downward.
Installing
Installation is performed in reverse order of removal. Note the following:
-
Reconnect exhaust system and install tunnel bridge. Component location and removing and installing.
-
Do not bend or kink selector lever cable.
-
Do not grease ball socket of selector lever cable.
-
Carefully insert selector lever cable in support bracket/transmission and press on to lever/selector shaft. Do not bend lever/selector shaft when
doing this, otherwise shifting can no longer be adjusted precisely.