New Beetle Convertible L5-2.5L (BPR) (2007)
‹› With integrated Tiptronic Switch ( F189)
‹› Can be tested in "Guided Fault Finding" using Vehicle Diagnosis, Testing and Information system (VAS 5051)
‹› Removing and installing => [ Selector Mechanism Cover and Circuit Board ] See: Removal and Replacement/Selector Mechanism Cover and
Circuit Board
5
Frame
‹› With cover strips
‹› Assembly overview => [ Selector Mechanism Frame Assembly Overview ] See: Removal and Replacement/Selector Mechanism Frame
Assembly Overview
‹› Disassembling and assembling => [ Selector Mechanism Frame ] See: Selector Mechanism Frame
6
Bracket
‹› With clip for selector lever cable
7
Locking plate
‹› For selector lever cable to selector mechanism housing
‹› Always replace
8
Selector lever cable
‹› Do not bend or kink
‹› If protective sleeve is damaged, the selector lever cable must be replaced
‹› Checking and adjusting => [ Selector Lever Cable, Checking and Adjusting ] See: Shift Linkage/Shift Cable/Testing and Inspection
‹› Removing and installing => [ Selector Lever Cable ] See: Shift Linkage/Shift Cable/Service and Repair
‹› Do not grease cable eyelet and ball socket
9
Self-locking nut, 10 Nm
‹› For cover at selector mechanism housing
‹› 4x
‹› Always replace
10
Cover
‹› For selector mechanism housing
‹› With bonded seal
11
Selector mechanism housing
‹› Removing and installing => [ Selector Mechanism ] See: Removal and Replacement/Selector Mechanism
12
Bolt
13
Locking washer
‹› For pivot pins => [ (Item 15) Pivot pin ] of pawl => [ (Item 14) Pawl ]
14
Pawl
‹› For shift lock solenoid