New Beetle Convertible L5-2.5L (BPR) (2007)
Valve Body: Service and Repair
Valve Body
Valve Body
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1756)
‹› Torque wrench (V.A.G 1331)
Removing
-
Observe general repair notes => [ General Repair Information ] See: Description and Operation/09G Transmission/General Repair Information.
-
First determine whether a coded radio is installed. In this case, determine anti-theft coding.
-
Switch ignition off and disconnect battery Ground (GND) cable.
-
Remove oil pan => [ Oil Pan ] See: Fluid Pan/Service and Repair.
-
Remove oil strainer => [ Oil Strainer ] See: Fluid Filter - A/T/Service and Repair.
-
Draw up a diagram of all sensors and solenoid valves with the corresponding connectors similar to the illustration.
-
Before disconnecting harness connectors at sensors and solenoid valves, mark solenoid valve or sensor and the corresponding connector.
‹› The sketch and markings are absolutely necessary to prevent interchanging of sensor and solenoid valve connections when reinstalling the valve
body.