New Beetle Convertible L5-2.5L (BPR) (2007)
-
Place pressure plate onto alignment pins.
-
Use centering mandrel (3190 A) to center clutch plate.
-
Hand-tighten all bolts evenly by hand until bolt head makes contact on pressure plate.
-
Tighten bolts in a diagonal sequence and in small stages to avoid damage to centering holes of pressure plate and centering pins of dual-mass
flywheel.
-
Install transmission => [ Transmission, Installing ] See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transmission, Installing.