New Beetle Convertible L5-2.5L (BPR) (2007)
6
Hex bolt, 20 Nm
‹› 3x
‹› For mounting bracket
7
Mounting bracket
8
Grommet
‹› Bearing for mounting bracket to transmission
9
Spacer
10
Cable retainer
‹› For selector cable on linkage lever
‹› Do not interchange! Cable retainers for selector lever cable on linkage lever and on transmission shift lever are different => [ Allocation of
Cable Retainers ]
11
Cable retainer
‹› For shift cable on transmission shift lever
‹› Do not interchange! Cable locking mechanisms for selector lever cable on linkage lever and on transmission shift lever are different => [
Allocation of Cable Retainers ]
12
Lock washer
‹› Always replace
13
Lock washer
‹› Always replace
14
Bearing bushing
15
Relay lever
‹› Installed position => [ Installation Position of Transmission Shift
Lever/Actuator Lever ]
‹› Adjust shift mechanism after installing => [ Shift Mechanism, Adjusting ] See: Shifter M/T/Adjustments.
16
Shoe
17
Transmission shift lever
‹› With counterbalance weight
‹› Insert so that master spline aligns with shift rod
‹› Installed position => [ Installation Position of Transmission Shift
Lever/Actuator Lever ]
‹› Adjust shift mechanism after installing => [ Shift Mechanism, Adjusting ] See: Shifter M/T/Adjustments.
18
Self-locking hex nut, 23 Nm
‹› Always replace
Allocation of Cable Retainers