New Beetle Convertible L5-2.5L (BPR) (2007)
/Page-3440008.png)
-
Remove retaining plate upward via recess.
Installing
Installation is performed in the reverse order of removal.
‹› After installing, check side window adjustment.
Window Regulator Motor
Removing
-
Remove carrier plate. Refer to => [ Retaining Plate ].
-
Remove four bolts - 1 - from rear side.
-
Carefully remove cable guide housing from motor.
‹› Cable tensioning roller must not loosen from window regulator.
-
Remove motor.
Installing
Installation is performed in the reverse order of removal.
