New Beetle Convertible L5-2.5L (BPR) (2007)
-
For very narrow gap dimensions, guide cutting cord from outside and press under lip using plastic wedge.
-
Place cutting cord around side window.
-
Secure one cord end to spooling tool (V.A.G 1654 ).
-
It is recommended to use spooling tool (V.A.G 1654 A ) instead of spooling tool (V.A.G 1654 ) because of shape and size of side window.
-
As shown in illustration, one suction cup can be removed from spooling tool. By doing this, the roller of the spooling tool can be placed closer to
window flange.
-
Pull through second cord inward and attach grip from (V.A.G 1351 ) to counterhold.
-
Move spooling tool according to position required and cut windshield free.
-
While cutting free, press cutting cord against window using plastic wedge in order to have clearance at window flange.
Installing Side Window
=> [ Undamaged Window, Preparing for Glazing ] See: Service and Repair/Removal and Replacement/Flush-Bonded Windows
=> [ New Window, Preparing for Glazing ] See: Service and Repair/Removal and Replacement/Flush-Bonded Windows
=> [ Window Flange, Preparing for Glazing ] See: Service and Repair/Removal and Replacement/Flush-Bonded Windows
=> [ Installation Information ] See: Service and Repair/Removal and Replacement/Flush-Bonded Windows
=> [ Minimum Curing Time ] See: Service and Repair/Removal and Replacement/Flush-Bonded Windows
Damaged Side Window