New Beetle Convertible L5-2.5L (BPS) (2006)
-
Pull padding out of bow to side - arrow -.
Installing
-
Pull padding into bow 2, 4 and rear bow.
Use lubricant for pulling in (e.g. silicone lubricant spray (D 007 000 A2)).
-
Press tubing into roof edge.
-
Align padding evenly.
-
Install center securing bolts at bow 2 and 4.
-
Slide beading strips, tension strap and padding into bows 2 and 4.
-
Install securing bolts into tubing on sides of bows 2 and 4.
-
Secure rubber cable with bolt to convertible top frame.
-
Install bolt for guiding rubber cable and padding loop to bow 3 for convertible top frame tension cable.
-
Guide connection wire for heated rear window and hinge through padding.
-
Guide rubber cable through headliner loop.
-
Press padding sealing tubing in at convertible top fabric retaining frame and secure using bolts.