New Beetle GL L4-2.0L (AZG) (2002)
Hood Latch Release: Service and Repair
Operating Lever, Removing And Installing
Removing
1
-
Lower A-pillar trim panel
2
-
Operating lever
-
Removing:
-
Pull operating lever approx. 2 cm.
-
Insert a small screwdriver into gap between operating lever and clip.
-
Release operating lever and unclip the clip from operating lever (clip falls behind trim).
-
Installing:
-
Engage clip completely in operating lever.
-
Then, press operating lever onto mount in mounting bracket.
-
Check function before closing hood.
3
-
Clip