New Beetle GL L4-2.0L (AZG) (2002)
Headliner: Service and Repair
Convertible Top
Convertible Top Headliner, Electric-/hydraulic And Manual Convertible Top, Removing And Installing
Removing
NOTE:
-
To operate convertible top hydraulically, rod flap motors must not be disconnected from vehicle electrical system on vehicles with
electric-/hydraulic convertible top.
-
Position side trim panels in vehicle so that rod flaps can move freely.
-
Servo motors may be disconnected from flap module.
-
Protect vehicle from paint damage by using suitable protective covers and fabric reinforced adhesive tape.
-
Always use new staples if available.
-
Remove side trim
-
Remove headrest cover
-
Open convertible top half way.
CAUTION: Observe safety precautions when working on convertible top.
-
Remove roof edge trim.
-
Remove bolts from roof edge - arrows -.
CAUTION: For safety reasons, keep tension on rubber cable when removing bolts.
-
Pull sealing piping - 1 - out of bow.