New Beetle GL L4-2.0L (AZG) (2002)
NOTE:
-
Before installing trim - 1 -, check clips - 5 - for damage and replace if necessary.
-
After assembling trim, make sure door inner seal is properly fitted.
Lower A-Pillar Trim, Removing and Installing
Lower A-pillar Trim, Removing And Installing
Removing
Drivers side
-
Remove front hood release lever.
-
Remove center part of clip - 4 - and remove clip from trim.
-
Unclip trim - 1 - at top from A-pillar and loosen from sill panel trim - 3 - at bottom.
NOTE: Trim - 1 - is inserted in foot rest cover - 2 -.
Passengers side