New Beetle GL L4-2.0L (AZG) (2002)
^
Do not disconnect brake hose when changing brake pads
17. Self-locking hex bolt, 35 Nm (26 ft. lbs.)
^
Always replace
18. Brake caliper
19. Brake pads
^
Thickness 12 mm (0.472 inch) without backing plate
^
Wear limit: 7 mm (0.276 inch) including backing plate
20. Pad retaining springs
^
Replace always when changing pads
Rear Brake Pads, Removing and Installing
Brake pads, removing and installing
Special tools and equipment
^
Resetting extracting tool T10165
^
Torque wrench VAG 1331
Note: Mark brake pads when removing if they are to be reused. Re-install in their original position to prevent uneven braking!
Removing
-
Remove wheels.