New Beetle GL L4-2.0L (AZG) (2002)
/Page-947009.png)
^
3409 Wedge
^
Piston resetting tool
Removing
^
Force piston out of brake caliper housing using compressed air.
CAUTION!
^
Place a piece of wood in the recess to prevent damaging the piston.
^
Use only enough air pressure to force piston out.
WARNING! Always wear safety goggles when working with compressed air.
^
Remove seal using wedge 3409.
CAUTION! When removing, use care to ensure that the cylinder bore is not damaged.
Installing
^
Install new piston seal in caliper.
^
Lubricate piston and cylinder bore lightly using grease G 052 150 A2.
