New Beetle GL L4-2.0L (AZG) (2002)
Vacuum Pump: Service and Repair
Brake vacuum pump -V192-, removing and installing
There are no provisions for servicing the brake vacuum pump -V192-. If a malfunction is detected the brake vacuum pump -V192- must be replaced.
The brake vacuum pump -V192- is located lower left on the subframe.
Removing
^
Remove bolts -1- on bracket for brake vacuum pump -V192-.
^
Remove hose -arrow- off brake vacuum pump -V192-.
^
Take out brake vacuum pump -V192-.
Bracket -arrow- for brake vacuum pump -V192-.
^
Remove lock nut -2- from bolt -1-.
^
Remove bolt -4- and take bracket out.
^
Remove bolts -3- to disassemble the bracket -arrow- further.
Installing
Install in reverse order.
Tightening torques
Torx socket head bolt for brake vacuum pump -V192- to bracket ........................................................................................................................... 8 Nm
Nut -2- to bracket ................................................................................................................................................................................................... 20 Nm
Bolts -3- to bracket ................................................................................................................................................................................................... 8 Nm
Bolt -4- to bracket .................................................................................................................................................................................................. 20 Nm