New Beetle GL L4-2.0L (AZG) (2002)
/Page-367002.png)
-
Remove engine cover.
-
Remove right-hand insulation tray
-
Remove ribbed belt.
-
Remove ribbed belt tensioning element.
Engine installed:
-
Turn crankshaft to cyl. 1 TDC -arrow-. (vehicles with manual transmission).
-
Turn crankshaft to cyl. 1 TDC -arrow-. (vehicles with automatic transmission).
Engine removed:
-
Turn crankshaft damper to cyl. 1 TDC -arrows-.
-
Remove coolant expansion tank and place to side. (hoses remain connected)
-
Pull off vacuum pipes at EVAP canister and at throttle valve housing.
-
Remove camshaft drive belt guard - upper section
