New Beetle GL L4-2.0L (AZG) (2002)
3
-
Shims
-
Used to adjust gap between clutch plate and pulley
-
Gap: 0.4 - 0.8 mm (0.015 - 0.023 in)
4
-
Circlip
-
Always replace
-
Install correctly:
Flat side faces compressor.
-
Ensure correct seating in groove
5
-
Clutch pulley
-
Removing See: A/C Clutch -N25-, Removing and Installing
6
-
Circlip
-
Replacing
-
Install correctly:
Flat side faces compressor
-
Ensure correct seating in groove
7
-
Clutch coil
-
Installing See: A/C Clutch -N25-, Removing and Installing
NOTE: A thermo- fuse integrated into the clutch coil protects the A/C clutch in the event of overheating (e.g.: due to a binding compressor). The
clutch coil circuit is interrupted.
8
-
Connector clip
-
With screw
9
-
Harness clip
10
-
Harness clip
11
-
Screw
12
-
Compressor
13
-
Threaded bushing