New Beetle GL L4-2.0L (AZG) (2002)
Headlamp Alignment Control Module: Service and Repair
Left Headlight, HID (With Range Control) Control Module
Left High Intensity Gas- discharge Lamp (with range control) Control Module -J567-, removing and installing
WARNING!
-
HIGH VOLTAGE!
-
Always disconnect battery Ground (GND) strap prior to servicing any parts of the HID lamp system marked with the yellow "HIGH
VOLTAGE!" symbol
-
After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.
The (master) control module is located in the left front wheel housing.
Removing
-
Remove left front wheel housing liner.
-
Remove nuts/bolts -1- for control module.
-
Disconnect electrical connection -2-.
Installing
Installation in reverse sequence of removal.
-
Check headlight function.
-
Code control module (function 07).
-
Perform headlight basic setting.