New Beetle GL L4-2.0L (AZG) (2002)
-
Connect multimeter using auxiliary cables from VAG 1594 to measure voltage at terminals 3 and 4 (connector to engine control module).
-
Start engine and run at idle speed.
-
Measure voltage supply and observe the display group 41, display zone 2.
Display: Htg.bC.ON:
-
Specification: 11.0-14.5V
Display: Htg. bC.ON/Htg.bC.OFF (alternating):
-
Specification: Between 0.0-12.0 V fluctuating
-
Switch ignition off.
If no voltage is present:
-
Remove inner plenum chamber cover, left:
-
Connect test box V.A.G 1598/31 to control module wiring harness. Engine control module is not connected by this action.