New Beetle GL L4-2.0L (AZG) (2002)
Relay Box: Service and Repair
Relay Panel and 13-Position Relay Panel
Relay panel and 13-position relay panel, removing and installing
CAUTION!
Before working on the electrical system:
-
Determine the correct coding for the antitheft radio.
-
Switch ignition off
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of the anti-theft radio.
Removing
-
Remove lower instrument panel trim on driver's side.
-
Remove both securing screws -C- (2 Nm) and loosen all bolted connections -D- as necessary.
-
Remove relay panel -B- and relay panel -A- downward.
Installing
-
Install in reverse order.