New Beetle GL L4-2.0L (AZG) (2002)
Fig. 1 Identifying selector segments
Dimension -a-
1
1st and 2nd gear selector segments 12.1 mm
2
3rd and 4th gear selector segments 77 mm
3
5th gear selector segments = 12.1 mm
Fig. 2 Installing circlip
-
Press circlip into selector segment groove with socket.
Note:
After installing the circlip the selector segment must rotate freely
A Socket driver, 10 mm
B Vise clamps
Fig. 3 Removing bearing inner race
Note:
When removing and installing the inner races do not bend the selector forks.
Fig. 4 Pressing inner race in onto stop