New Beetle GLS L4-1.8L Turbo (AWV) (2001)
Power Trunk / Liftgate Lock Actuator: Service and Repair
Carrier For Rear Lid Remote Release Motor, Removing And Installing
Removing
-
Remove rear lid trim
-
Disconnect harness connectors - arrows -.
-
Unclip operating rod - 1 - for rear lid lock.
-
Pull clip - 2 - and wiring out of body hole thus releasing wiring.
-
Remove bolts - 1 - and remove carrier plate - 2 - for electrical wiring.
-
Remove bolts - 1 - and pull water drain hose - 3 - off carrier - 2 -.