volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Instrument Panel, Gauges and Warning Indicators > < Signal From Clutch Vacuum Vent Valve Switch -F36- Checking|Page 9777
Page 4
background image

-

Check wiring for open circuit between test box and 4-pin connector using Electrical Wiring Diagram.
-

terminal 3 + socket 55

-

terminal 4 + socket 56

Wire resistance: Max. 1.5 Ohms

-

Also check wires for short to one another.

-

Also check wiring for short to battery positive or Ground (GND).

If no wiring malfunction is found:

-

Replace Motronic Engine Control Module (ECM) -J220-.

Instrument Panel, Gauges and Warning Indicators > < Signal From Clutch Vacuum Vent Valve Switch -F36- Checking|Page 9777